manualshive.com logo in svg

Sony CSP-5000E, Service Manual, Page: 3 / 78

Share
Download
Sony CSP-5000E Service Manual Download Page 3

1

CSP-5000E

CSPK-5000E

This manual is the Service Manual Vol.1 for the system controller CSP-5000E, the

optional input board CSPB-510VC and the optional output board CSPB-520VC, and

the system keyboard CSPK-5000E.

This manual contains maintenance information on this equipment, and servicing

information necessary for parts replacement and adjustments.

In addition to this Service Manual Vol.1, the following manuals are provided.

• Operating Instructions (Supplied with equipment)

CSP-5000E

Part No. 3-860-960-11 (English, French, German, Spanish and Italian for CE)

CSPK-5000E

Part No. 3-860-961-11 (English and French for CE)

3-860-961-12 (German, Spanish and Italian for CE)

CSPB-510VC

Part No. 3-860-962-11 (English, French, German, Spanish and Italian for CE)

CSPB-520VC

Part No. 3-860-963-11 (English, French, German, Spanish and Italian for CE)

Describe how to operate this equipment.

• Service Manual Vol.2 (Not supplied with equipment)

Part No. 9-977-305-21

Describes the board layouts, schematic diagrams, semiconductor pin assingments

and parts lists.

Purpose of this manual

Related Manuals

MANUAL STRUCTURE

The sections covered in the manual are summarized below to give you a general

understanding of the manual.

SECTION 1

OPERATING INSTRUCTIONS

Describes the contents of the operating instructions.

SECTION 2

SERVICE OVERVIEW

Describes the replacement of the parts, the locations of the main parts and boards,

notes and so on.

SECTION 3

TROUBLESHOOTING

Describes the troubleshooting.

SECTION 4

ELECTRICAL ALIGNMENT

Describes the electrical adjustment.

SECTION 5

CIRCUIT DESCRIPTION AND BLOCK DIAGRAMS

Describes circuit operation accompanied by block diagrams.

Contents

Summary of Contents for CSP-5000E















































































Reviews:

No comments