COM-1.US.2-668-393-12(2)
Getting Started…
Preparing a Power Source
20
20
Charging the battery using the supplied USB cable
Connect the supplied USB cable to the
(USB) connector of
the unit, and then connect the USB cable to the computer.
USB cable (supplied)
To
(USB)
connector
The unit automatically turns on. The CHARGE and POWER indicators
light up, and the battery indicator sections (
) appear on the display in
succession as charging progresses.
A complete charge requires approximately 4 hours.
Notes
• The supplied interface cable must be used with the equipment in order to comply with
the limits for a digital device pursuant to Subpart B of Prat 15 of FCC Rules.
• If your unit is connected to your computer via the included USB cable and the computer
enters a power saving mode (such as system suspend, sleep, or hibernation), then your
unit’s battery will begin discharging.
• Do not leave the unit connected for extended periods to a notebook computer that is not
connected to AC power, because the unit may discharge the computer’s battery.
• If the unit does not automatically turn on when you connect it to your computer using
the USB cable, wait a few minutes, and then turn it on by sliding the POWER switch
down (
page 22).
• Connecting the unit via a USB hub may not work and is not supported. Connect the
USB cable directly to the computer.
• Charging may take a long time if you operate the unit while it is charging.
Continued
Index
Table of
Contents