manualshive.com logo in svg

Sony CMT-SE7, Operating Instructions Manual

Share
Download
Sony CMT-SE7 Operating Instructions Manual Download Page 93

Ad
ditional Inf

o

rm
ation

masterpage:Right

filename[\\Nas-data-server\SONY Current jobs\SONY CMT-SE7\CMT-
SE7_GBCT\DTP\4248325112\424832511CMTSE7HK\GB14INF-CEK.fm]

 model name[CMT-SE7]

 [4-248-325-11(2)]

93

GB

Notes on MDs

• Do not open the shutter to expose the MD. Close the 

shutter immediately if the shutter opens.

• Affix the label supplied with the disc only to the 

specified label indentation. Do not affix the label 
around the shutter or in other locations. Note that the 
shape of the indentation depends on the disc.

• Wipe the disc cartridge with a dry cloth to remove 

dirt.

• Do not expose the MD to direct sunlight or heat 

sources such as hot air ducts, nor leave it in a car 
parked in direct sunlight.

Notes on discs

• Before playing, clean the disc with a cleaning cloth. 

Wipe the disc from the center out.

• Do not use solvents such as benzine, thinner, 

commercially available cleaners or anti-static spray 
intended for vinyl LPs.

• Do not expose the disc to direct sunlight or heat 

sources such as hot air ducts, nor leave it in a car 
parked in direct sunlight.

• Do not use discs encircled with a protection ring. 

This may cause a malfunction to the system.

• When using discs that have glue or similar tacky 

substance on the label side of the disc or that used a 
special ink when the label was printed, there is a 
chance that the disc or label may become attached to 
parts inside this unit. When this occurs, it may not be 
possible to remove the disc, and may also cause this 
unit to malfunction. Be sure to check that the label 
side of the disc is not sticky before using.
The following types of disc should not be used:

– Rental or used discs with attached seals where the 

glue extends beyond the seal. The perimeter of the 
seal on the disc is tacky.

– Discs that have labels printed using a special ink 

that feels tacky when touched.

• Discs with non-standard shapes (e.g., heart, square, 

star) cannot be played on this unit. Attempting to do 
so may damage the unit. Do not use such discs.

Cleaning the cabinet

Clean the cabinet, panel and controls with a soft cloth 
slightly moistened with mild detergent solution. Do not 
use any type of abrasive pad, scouring powder or 
solvent such as thinner, benzine or alcohol.

Disc cleaning

Do not use a commercially available CD/DVD lens 
cleaning disc with this system, as this may result in 
malfunction.

Label 
position

Shutter

Summary of Contents for CMT-SE7









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands