![background image](http://html.mh-extra.com/html/sony/cmt-se7/cmt-se7_operating-instructions-manual_420449036.webp)
masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-SE7\CMT-
SE7_GBCT\DTP\4248325112\424832511CMTSE7HK\GB08MDP-CEK.fm]
36
GB
model name [CMT-SE7]
[4-248-325-11(2)]
Other operations
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press
MD
N
. However, the program is cleared when you
remove the MD or press MD GROUP.
• “– – –.– –” appears when the total program time
exceeds 1,000 minutes.
• If you operate this unit with the lid closed, “OPEN”
blinks in the front panel display. Open the lid and
confirm the displayed message before proceeding.
This function allows you to listen only to your
favorite tracks which you have registered into a
group. For details of the Group Function, see
“Registering tracks in groups” on page 49.
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MD GROUP in stop mode
repeatedly until “GROUP ON” appears.
3
Press GROUP SKIP repeatedly until the
desired group appears.
4
To start playing from a specific track in
the group, press
.
or
>
repeatedly until the desired track
appears.
Proceed to step 5 when you start playing
from the first track in the group.
5
Press MD
N
.
Playback starts.
When the playing of the last track in the
group finishes, the unit stops automatically.
Note
If you select a group that does not have any tracks
registered and press MD
N
, playback starts from the
first track of the first group on the MD.
Tip
You can change play mode (Normal Play/Shuffle Play/
Repeat Play/Program Play) only for the tracks in the
group. To select the desired play mode, select the play
mode before step 3.
To
Do this
Cancel Program
Play
Press PLAY MODE in stop mode
repeatedly until both “PGM” and
“SHUF” disappear.
Check the
program order
Press
.
or
>
repeatedly
during Program Play.
Check the total
number of
programmed
tracks
Press DISPLAY on the unit in stop
mode. The total number of
programmed steps appears.
Add a track to the
end of the
program
Perform steps 3 and 4 in stop
mode.
Clear a track
from the end of
program
Press CLEAR in stop mode or
after step 4.
Playing only the tracks in
the desired group