![background image](http://html.mh-extra.com/html/sony/cmt-se7/cmt-se7_operating-instructions-manual_420449048.webp)
masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-SE7\CMT-
SE7_GBCT\DTP\4248325112\424832511CMTSE7HK\GB09MDE-CEK.fm]
48
GB
model name [CMT-SE7]
[4-248-325-11(2)]
Before you start editing
You can edit an MD only when:
• The MD is recordable.
• The MD play mode is Normal Play.
Check the following, before editing.
1
Check the tab of the MD to be edited.
Slide the tab to close the slot.
If the MD is protected, you cannot edit the
MD.
2
Press PLAY MODE repeatedly until
both “SHUF” and “PGM” disappear.
You can edit the MD only in Normal Play
mode. You cannot edit the MD in Shuffle or
Program Play mode.
When editing an MD
Open the lid of the unit before editing the
MD
If you start editing an MD with the lid closed,
“OPEN” blinks in the front panel display. Open
the lid and confirm the displayed message
before proceeding.
When “Tr Protect” appears
Some tracks, such as those transferred to a Net
MD (Check-Out), are protected. These tracks
cannot be modified using certain editing
functions.
To quit while editing
Press MENU/NO.
After editing
Press
Z
on the front of the unit to remove
the MD or press
?/1
to turn off the system.
“TOC” starts flashing. The TOC is updated and
editing is completed.
Before pulling out the mains lead
MD editing is completed when the MD Table of
Contents (TOC) is updated. The TOC is updated
when you eject the MD or press
?/1
to turn off
the system. Do not pull out the mains lead before
updating the TOC or while updating the TOC
(while “TOC” lights up or flashes) to ensure a
complete editing.
Note
If you edit an MD while manually recording the MD to
a tape, the sound (rehearsal sound, etc.) produced
during the editing is recorded on the tape.
MD – Editing
Editing tips