![background image](http://html.mh-extra.com/html/sony/cmt-px5/cmt-px5_operating-instructions-manual_420430032.webp)
32
Recording for long times
This system has two long time recording modes:
LP2 and LP4 (MDLP recording). When recording
in LP2 Stereo mode, you can record 2 times the
normal recordable time, and in LP4 Stereo mode,
you can record 4 times the normal recordable
time. In addition, the recordable time for monaural
recording is approximately double the stereo
recording time.
Note
Tracks recorded in MDLP (LP2 or LP4) Stereo mode
cannot be played back on a system that does not
support MDLP mode. In addition, you cannot use S.F
Edit and some other MD edit functions for tracks
recorded in MDLP mode.
1
1
Press REC MODE repeatedly to select
the recording mode before starting to
record with CD-MD Synchro
Recording, etc.
Each time you press the button, the display
changes as follows:
No display (Stereo)
t
LP2 (LP2 Stereo)
t
LP4 (LP4 Stereo)
t
MONO (Monaural)
t
no display (Stereo)
t
…
2
Start the recording.
The source is recorded in the selected
recording mode.
Selected recording mode
(No indicator in stereo mode)
Changing the recording mode
The selected recording mode is kept even after
recording has finished, so be sure to check the
recording mode before recording. To change the
recording mode, press REC MODE repeatedly to
switch to the recording mode you want.
During High-Speed CD-MD
Synchro Recording
The recording speed changes according to the
recording mode.
Recording mode
Recording speed
Stereo
Quadruple speed
LP2 Stereo
Double speed
LP4 Stereo
Double speed
Monaural
Quadruple speed
Before pulling out the mains lead
MD recording is completed when the MD Table
of Contents (TOC) is updated. The TOC is
updated when you eject the MD or press
?/1
to
turn off the system. Do not pull out the mains lead
before updating the TOC (while “TOC” is lit) or
while updating the TOC (while “TOC” is flashing)
to ensure a complete recording.