![background image](http://html.mh-extra.com/html/sony/cmt-px5/cmt-px5_operating-instructions-manual_420430018.webp)
18
7
Press CD
H
.
All the tracks play in the order you selected.
To check the total number of
programmed tracks
Press TIME in stop mode. The total number of
programmed tracks (steps) appears, followed by
the last programmed track number and the total
playing time of the programme.
Total playing time
of the programme
To check the programme order
Press
.
or
>
during Programme Play.
To
Do this
Cancel
Programme Play
Press
x
, then press PLAY
MODE repeatedly until
“PROGRAM” and
“SHUFFLE” disappear.
Add a track to the
programme (in
stop mode)
Perform steps 3 to 5.
Last programmed
track number
Erase the last
programmed track
Press CLEAR in stop mode.
Each time you press the
button, the last programmed
track is erased.
To select the desired track using
the number buttons
Press number buttons instead of performing steps
4 to 6.
To enter track numbers 10 or over, press >10 and
the track number. To enter 0, use the 10/0 button.
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press CD
H
.
• “Step Full!” appears when you try to programme 26
or more tracks (steps).
• “--.--” appears when the total CD programme time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.
3
Press D.SKIP repeatedly to select the
desired CD.
You can also use CD 1 – 3 to select a CD.
To programme all of the tracks on a single
CD at once, proceed to step 5 with “AL”
displayed.
Selected CD number
4
Press
.
or
>
repeatedly until the
desired track appears.
Selected CD and
track number
Playing time of
the selected track
5
Press ENTER/YES.
The track is programmed. The number of the
track in the programmed sequence (the Step
number) appears, followed by the last
programmed track number and the total
playing time of all the programmed tracks.
If you made a mistake, you can clear the last
programmed track from the programme by
pressing CLEAR.
Last programmed
track number
Total playing
time
6
To programme additional tracks, repeat
steps 3 to 5.
Programming CD tracks
(continued)