![background image](http://html.mh-extra.com/html/sony/cmt-px5/cmt-px5_operating-instructions-manual_420430027.webp)
The MD Deck
—
Recording
27
Selected CD and
track number
Playing time of the
selected track
5
Press ENTER/YES.
The track is programmed. The number of the
track in the programmed sequence (the Step
number) appears, followed by the last
programmed track number and the total
playing time of all the programmed tracks.
Last programmed
track number
Total playing time
6
To programme additional tracks, repeat
steps 3 to 5.
3
Press CD 1 – 3 to select the desired CD.
To programme all of the tracks on a single
CD at once, proceed to step 5 with “AL”
displayed.
4
Turn –
l/L
+ to select the desired
track.
Recording on an MD
7
Insert a recordable MD.
8
Press CD SYNC NORM SPEED.
The MD deck stands by for recording and the
CD player pauses for play.
9
Press MD
HS
.
CD playing and MD recording start. The CD
player and the MD deck stop automatically
when the recording is completed.
To stop recording
Press
s
.
Before pulling out the mains lead
MD recording is completed when the MD Table
of Contents (TOC) is updated. The TOC is
updated when you eject the MD or press
?/1
to
turn off the system. Do not pull out the mains lead
before updating the TOC (while “TOC” is lit) or
while updating the TOC (while “TOC” is flashing)
to ensure a complete recording.
Notes
• If the play mode is set to Repeat Play or Shuffle
Play, it automatically switches to normal play in
step 8.
• If the MD is record protected, “C11” and
“Protected” appear alternately and the MD cannot
be recorded. Remove the MD, then slide the record
protection tab to the closed position (see page 26).
• The following items are either inoperative or cannot
be used during CD-MD Synchro Recording:
— The Auto Cut function
— The recording level specified in the Setup menu
continued