![background image](http://html.mh-extra.com/html/sony/cmt-cp505md/cmt-cp505md_operating-instructions-manual_420294008.webp)
8
GB
CMT-CP505MD 4-241-515-11(1) GB
3
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
4
Connect the power cord to a wall outlet.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
To turn on the system, press
@
/
1
.
Inserting two R6 (size AA)
batteries into the remote
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
110V-120V
220V-240V
VOLTAGE
SELECTOR
Setting the clock
1
Press
?/1
to turn on the system.
2
Press CLOCK/TIMER SET on the
remote.
3
Press
.
or
>
on the remote
repeatedly to set the hour.
4
Press ENTER/YES or CURSOR
t
on
the remote.
5
Press
.
or
>
on the remote
repeatedly to set the minute.
6
Press ENTER/YES on the remote.
The clock starts working.
If you make a mistake
Press
T
CURSOR or CURSOR
t
on the
remote repeatedly until the incorrect item
flashes, then set it again.
To adjust the clock
1
Press CLOCK/TIMER SET on the remote.
2
Press
.
or
>
on the remote to select
“CLOCK SET”, then press ENTER/YES on
the remote.
3
Do the same procedures as step 3 to 6 above.
Hooking up the system (continued)
e
E
e
E