45
GB
Tape – Play / Tape – Recording
CMT-CP505MD 4-241-515-11(1) GB
Recording your favorite
CD tracks on a tape
— CD-TAPE Synchro Recording
You can record a whole CD on a tape.
You can use TYPE I (normal) tape.
1
Load a recordable tape.
2
Load a CD you want to record.
3
Press SYNCHRO repeatedly until
“CD
t
TAPE SYNC” appears.
4
Press ENTER/START.
“Press START” flashes.
The tape deck stands by for recording and
the CD player pauses for play.
“
N
” lights up and the tape deck stands by
for recording.
To start recording from the side facing away
from you, press TAPE
nN
until
“
n
” lights up.
5
Press DIRECTION repeatedly until
g
appears to record on one side or
h
(or
j
) to record on both sides.
If you select both sides recording and the
tape reaches the end of the front side part-
way through a track, the entire track is
recorded again from the beginning of the
reverse side. If you start from the reverse
side, recording stops at the end of the
reverse side.
6
Press ENTER/START while “Press
START” flashes.
Recording starts.
When the recording is completed, the CD
player, and the tape deck stop automatically.
To stop recording
Press TAPE
x
.
Recording on an MD and a tape at
the same time
Insert a recordable MD, then select “DUAL
SYNC” in step 3.
Even if the MD or the tape ends part-way
through the recording, the other continues
recording.
To record only your favorite CD
tracks
You can record only your favorite CD tracks
using the Program Play. Between steps 2 and 3,
perform steps 1 to 5 of “Programming CD
tracks” (page 10).
Tape – Recording