39
GB
MD – Editing
CMT-CP505MD 4-241-515-11(1) GB
Changing the recorded
level after recording
— S.F Edit Function
You can change the volume of recorded tracks.
The original track is recorded over at the new
recording level. When changing the recording
level, you can select Fade-in Recording to
gradually increase the signal level at the start of
recording, or Fade-out Recording to gradually
decrease the signal level at the end of the
recording.
Changing the overall
recording level
1
Press MD on the remote.
2
Press MENU/NO on the remote to
display “Edit Menu”.
3
Press
.
or
>
on the remote
repeatedly until “S.F Edit?” appears,
then press ENTER/YES on the remote.
4
Press
.
or
>
on the remote
repeatedly until “Tr Level?” appears,
then press ENTER/YES on the remote.
5
Press
.
or
>
on the remote
repeatedly until the track number you
want to change the recording level
appears, then press ENTER/YES on the
remote.
“Level 0dB” appears.
6
While monitoring the sound, press
.
or
>
on the remote repeatedly to
change the recorded level.
The recording level can be changed from
–12 dB to +12 dB, in 2 dB steps. Change to
the optimum level while making sure that
“OVER” does not appear in the display at
the loudest portion.
7
Press ENTER/YES on the remote.
“S.F Edit OK?” appears.
8
Press ENTER/YES on the remote again.
The deck starts recording over the existing
track. “S.F Edit: ** %” appears while the
track is being recorded. An amount of time
that is roughly equal to or longer than the
playback time of the track is required when
recording over the track. When the
recording finishes, “Complete!” appears.
Adjust the level so as not to light up “OVER”
TOC
L-SYNC
OVER
continued