![background image](http://html.mh-extra.com/html/sony/cmt-cp505md/cmt-cp505md_operating-instructions-manual_420294010.webp)
10
GB
CMT-CP505MD 4-241-515-11(1) GB
Programming CD tracks
— Program Play
You can make a program of up to 25 tracks.
1
Press CD on the remote.
2
Press PLAY MODE in stop mode
repeatedly until “PGM” appears.
3
Press
.
or
>
on the remote
repeatedly until the desired track
number appears.
4
Press ENTER/YES on the remote.
The track is programmed.
The step number appears, followed by the
total playing time of the program.
If you made a mistake, you can clear the last
programmed track from the program by
pressing CLEAR on the remote.
Selected track number
Last programmed
track number
Total playing time
L-SYNC
PGM
L-SYNC
PGM
Other operations
To
Stop play
Pause
Select a track
Find a point in
a track
Play repeatedly
(Repeat Play)
Remove a disc
To enter track number using the
remote
You can also select the desired track using the
remote during Normal Play.
Press the numeric buttons. The playback
automatically starts.
To enter track number over 10
1
Press >10.
2
Press the numeric buttons for the same
number of “–” flashing in the display.
To select 0, press 10/0.
Example:
To enter 20 while “--” flashes in the display, press
2, 10/0.
Do this
Press CD
x
(or
x
on the remote).
Press CD
NX
(or
X
on the
remote). Press again to resume
play.
Turn
l/L
clockwise or
counterclockwise (or press
.
or
>
on the remote repeatedly).
During play, turn and hold
m/
M
clockwise or
counterclockwise (or press and
hold
m
or
M
on the remote).
Release it when you find the
desired point.
Press REPEAT repeatedly during
playback until “REP” or “REP1”
appears in the display.
REP: For all the tracks on the CD
up to 5 times.
REP1: For only the currently
playing track.
To cancel playing repeatedly, press
REPEAT repeatedly until “REP”
and “REP1” disappear from the
display.
Press CD
Z
.
Playing time of the
selected track
Playing a CD (continued)