43
7
TRIG (trigger mode select) switch
Sets the trigger mode for E-DONPISHA.
INT: Sends a cyclical constant trigger pulse (2V) to the
camera module.
EXT: Sends a trigger pulse to the camera module with the
external trigger pulse.
NORM: Stops E-DONPISHA and sets to the normal
mode. You can switch to the normal mode from this
unit even if the SHUTTER switch on the rear of the
camera module is set to ED (E-DONPISHA mode).
8
W.E OUT (Write Enable pulse output) connector
(BNC-type)
Outputs the WEN (timing) pulse when the video signal is
output. The WEN pulse informs an external device (i.e.
image processing system) when to read the video signal.
Output is performed in the open collector output.
Summary of Contents for CMA-87
Page 35: ...35 ...
