Sony BVP-E10 Series, Product Information Manual

Page: 179 / 204

179 Chapter 11 Specifications
BVP-E10 Series Product Information Manual
11-6. CCU-900/ 900P, Camera Control Unit
General
Dimensions
Environment for installing and using the equipment
•Avoid rooms of high temperature or placing near a
heat source.
•Avoid a place with strong electric or magnetic field.
•Set in a cool, dry place.
•Keep out of direct sunlight or other strong light.
Input/Output connectors
Input connectors
Power supply 100/110-120/220-240 V AC,
50/60 Hz
Current consump-
tion 5 A (at 100 V AC, entire sys-
tem active)
Peak in rush current
(1) Power ON, cur-
rent probe method:
80 A (240 V) 60 A (100 V)
(2) Hot switching
inrush current,
measured in
accordance with
European standard: EN55103-1: 10 A (230 V)
Operating tempera-
ture 5°C to 40°C (41°F to 104°F)
Storage temperature -20°C to +60°C (-4°F to
+140°F)
Humidity no condensation
Dimensions (w/h/d) Approx. 424 x 133 x 460 mm
(16
3/4
x 5
1/4
x 18
1/8
inches)
Mass (Approx.) Approx. 20 kg (44 lb 1 oz)
133
(5
1
/
4
)
481
465
424
(16
3
/
4
)
57.2
460
(18
1
/
8
)
CAMERA Optical-fiber connector (1)
1.08Gb/s SDI ’L 2, 240 V
AC power supply
INCOM/TALLY/PGM D-sub 25-pin connector (1)
• INCOM-4W, 2 systems (PD/
ENG), 0 dB
• PGM, 2 systems, 0 dB/-20
dB
• TALLY (R, G), TALLY
contact
INCOM REMOTE D-sub 25-pin (1)
RCP/CNU 8-pin multiconnector (1)
TRUNK LINE 1/
TRUNK LINE 2 D-sub 9-pin, female (1)
RS-232C, for CHU transmis-
sion
AUX 1/AUX 2 D-sub 9-pin, female (1)
RS-422, for CCU system
expansion
AC IN 100 to 120, 220 to 240 V AC
switchable
PROMPTER IN BNC-type (1), with loop-
through output, SMPTE-
292M analog signal,
1.0 Vp-p, 75-ohms
SERIAL RET INPUT BNC-type (4), SMPTE-259M,
0.8 Vp-p, 75 ohms,
270Mb/s bit rate
REFERENCE IN BNC-type (1), with loop-
through output,
composite SYNC/VS
RET INPUT BNC-type (4), 1.0 Vp-p, 75
ohms, analog signal
AUX IN BNC-type (1)
SDI video signal
0.8 Vp-p, 75 ohms,
270Mb/s bit rate