Sony BVP-E10 Series, Product Information Manual

Page: 145 / 204

145 Chapter 9 Connector Pin Assignment
BVP-E10 Series Product Information Manual
(0 dBu = 0.775 Vrms)
9-3-1-12 CAMERA (68P MALE)
For Analog Interface (upper side)
8 TRACKER T IN
(Y) TRACKER TALK
0 dBu / -20 dBu
High impedance balanced
9 TRACKER T IN
(G) GND for TRACKER T
10 PGM OUT (X) -20 dBu unbalanced
11 (Spare)
12 G TALLY ON : GND
OFF : High impedance
13 NC No connection
14 RX_DATA_IN (0) TRUNK DATA IN, RS232-C
15 RX_DATA_IN (1) TRUNK DATA IN, RS232-C
16 NC No connection
17 NC No connection
18 TX_DATA_OUT (0) TRUNK DATA OUT, RS232-
C
19 TX_DATA_OUT (1) TRUNK DATA OUT, RS232-
C
20 GND
No. Signal Specifications
1 UNREG GND GND for UNREG
2 UNREG GND GND for UNREG
3 VF UNREG GND GND for VF UNREG
4 LENS UNREG
GND GND for LENS UNREG
5 UNREG OUT 10.5 V to 17 V
6 UNREG OUT 10.5 V to 17 V
7 VF UNREG OUT 10.5 V to 17 V
8 LENS UNREG
OUT 10.5 V to 17 V
9 R IN (X) No connection
10 B IN (X) No connection
11 VBS IN (G) GND for VBS VIDEO
12 Y IN (X) No connection
13 B-Y IN (X) No connection
14 RET B-Y OUT (X) 0.7 V p-p, Zo = 75 Ohms
15 C IN (X) No connection
16 VBS GENLOCK
OUT (X) 1.0 V p-p ± 6 dB, Zo = 75
Ohms
17 RET VIDEO OUT
(G) GND for RET VIDEO
18 MONITOR VIDEO
IN (X) VS 1 Vp-p, Zi = 75 k Ohms
19 BATTERY ALARM
OUT Zo = 220 Ohms
20 NC No connection
21 AUDIO CH1
CONT IN 0 V (0 dB) to 7 ± 0.5V
(-50 dB)
22 MIC IN (Y) Zi = 600 Ohms,
-60 dBu balanced
No. Signal Specifications
1
35
34
68
(External view)
23 NC No connection
24 SKIN TONE GATE
IN No connection
25 TAPE REM OUT No connection
26 VTR SYNC IN No connection
27 RET EN IN ENABLE; 0 V,
DISABLE; OPEN
28 PB REF OUT PB; +5.0 V, CAM; 0 V
29 H CONT OUT 0 V to 5 V,
Max frequency at 5 V
30 ANALOG GND
31 DIGITAL HD IN 3.3 V p-p for Digital
32 COM CONT OUT 5 V p-p
33 IIC CLOCK IN
(CA) 5 V p-p
34 IIC CLOCK IN
(ST) 5 V p-p
35 UNREG GND GND for UNREG
36 UNREG GND GND for UNREG
37 VF UNREG GND GND for VF UNREG
38 LENS UNREG
GND GND for LENS UNREG
39 UNREG OUT 10.5 V to 17 V
40 UNREG OUT 10.5 V to 17 V
41 VF UNREG OUT 10.5 V to 17 V
42 LENS UNREG
OUT 10.5 V to 17 V
43 G IN (X) No connection
44 R/G/B GND No connection
45 VBS IN (X) 1.0 V p-p
±
10 %, Zi = 75
Ohms
46 R-Y IN (X) No connection
47 Y/R-Y/B-Y GND No connection
48 RET R-Y OUT (X) 0.7 V p-p, Zo = 75 k Ohms
49 C GND No connection
50 VBS GENLOCK
OUT (G)
GND for GENLOCK
51 RET VIDEO OUT
(X) 1.0 V p-p, Zo = 75 Ohms
52 MONITOR VIDEO
IN (G) GND for MONITOR VIDEO
53 VTR START/STOP
IN Zi < 10 k Ohms
54 NC No connection
55 MIC IN (G) GND for CAM MIC
56 MIC IN (X) Zi > 600 Ohms,
-60 dBu balanced
57 NC No connection
58 NC No connection
59 AUDIO LEVEL
OUT No connection
60 NC No connection
61 V RESET OUT/CF
IN No connection
62 REC TALLY OUT No connection
63 VTR SAVE IN No connection
64 GND
65 CA (CONT/DATA) No connection
66 COM DATA IN 5 V p-p
No. Signal Specifications