1-8 (E)
VSR-2000A
1-6. Rack Mounting
c
Install the unit in a stable location.
If the unit is mounted on a unstable table or slant bench,
the unit can fall and result in physical injury.
c
Use the specified support angle.
If the parts other than the specified one are used, the unit
can fall and results in physical injury.
This unit can be mounted in a 19-inch standard rack of EIA
standard. To mount the unit in the rack use the specified
rack mount kits and parts.
n
Mount the unit in the rack with the HDD removed from the
unit.
Specified rack mount kit : RMM-2000 (option)
Constituent parts
.
Outer Support Assembly
2 pcs
Outer Support
2 pcs
Bracket
4 pcs
Screw (B4
x
8)
8 pcs
Inner Support
2 pcs
.
Plate Nut
4 pcs
.
Screw (B4
x
12)
8 pcs
.
Screw (B4
x
8)
10 pcs
The following parts are supplied for rack mounting.
.
Rack mounting screw (RK5
x
14)
4 pcs
.
Rack mounting ornamental washer
4 pcs
n
Standard Tightening Torque
Screw Size
Standard Tightening Torque
M3.0
0.7 to 1.0 N
.
m (7 to 10 kgf
.
cm)
M4.0
1.2 to 1.6 N
.
m (12 to 16 kgf
.
cm)
1.
Turn off the power of the rack mounted unit incorpo-
rating the HDD.
2.
Remove the four screws at the both sides of the unit,
and remove the four foot-holder assemblies while
lifting up the unit.
3.
Attach the two inner supports to the side panels of the
unit.
4.
Loosen the four screws of the outer support assembly
to slide the brackets.
B4
x
6
Foot-holder
assembly
B4
x
8
B4
x
8
Inner support
Outer support assembly
Bracket
Bracket
B4
x
8
B4
x
8
1-6. Rack Mounting
