6-8
DVS-7150E IM
6-3. Set-up
The processes to construct the system are described below.
Basically set up in the following sequence.
For any process that does not need to change the selection exists, no problem that the process is not re-
changed in this selection.
1.
Confirmation of the Software Version
2.
Setting of the Signal Format
3.
Setting about System
4.
Setting of the System Configuration
5.
Assigning of the Crosspoint
6.
Assigning of the Key Sources for Key Fill (By Key Source Auto Select Mode)
7.
Setting of the Switcher Input Signal
8.
Setting of the Chroma Key Input Signal
9.
Setting of the Switcher Output Signal 1
10. Setting of the Switcher Output Signal 2
11. Setting of the Synchronized Signal Change of Assignment
12. Setting of the Assignable Output Signal
13. Setting of the Internal Generation Matte Signal
14. Setting of the DME Interface
15. Setting of the GPI Input
16. Setting of the GPI Output
17. Setting of the Operation mode
n
For details of set-up and saving the data, refer to the following user’s guide (option).
User’s Guide : BZS-7080 (English)
6-3. Set-up
