4-2
DVS-7150E IM
4-1. Installation of Plug-in Boards
It is possible to be used DVS-7150 for various systems, and its functions can be extended by selecting the
optional boards. Each plug-in board must be installed in the corresponding slot of DVS-7150. Confirm
that all the boards are in the specified slots by referring to the following table.
For the details of how to install the plug-in board, refer to “4-3-2. Inserting/Pulling Out of Plug-in
Boards”.
The board name are displayed near the eject lever at the left side on the A side of each plug-in board. The
slot numbers that can be installed the board are displayed on the inside of the front panel of DVS-7150.
Like the standard board, each optional boards should also be installed in the specified slot according to
the slot number display.
m
(1) Confirm that the connectors on each board are securely connected to the MB-828 board of the main
unit.
(2) If the board is installed in an incorrect slot, a system error occurs. Then the system is not activated
properly.
(3) Be sure to confirm the supply voltage when an optional board is added or a board is replaced.
(Refer to “5-3. Adjustment of Secondary Power Supply Voltage”.)
4-1. Installation of Plug-in Boards
Board name
Ejectlever
(A Side)
1 ADC-21
2 ADC-21
3 XPT-15
4 OUT-9
5 MIX-35A
BD-26
6 MIX-35B
BD-26
7 CRK-10
8 ENC-34A
ADC-22
9 CA-35
CPU-264
ADC-21
