1-1 (E)
BDX-N1000
Section 1
Installation
1-1. Installation Environment
Operating temperature : 5
d
C to 40
d
C
Storage temperature :
_
20
d
C to
+
55
d
C
Operating humidity :
20 % to 90 %
(non-condensing)
Do not install the BDX-N1000 in the following locations.
.
Areas where the unit will be exposed to direct sun light
or any other strong lights.
.
Areas near heat sources.
.
Dusty areas or areas where it is subject to vibration.
.
Areas with strong electric or magnetic fields.
.
Areas where is subjected to electricity noise.
.
Areas where is subjected to static electricity noise.
To prevent the temperature rise inside the BDX-N1000,
pay careful attention to circulation of air in the place where
the BDX-N1000 is installed.
The rear side of the BDX-N1000 should be at least 20 cm
(8 inches) away from walls for ventilation and
maintenance.
c
Do not block the ventilation holes.
If the ventilation holes are blocked, the temperature inside
the BDX-N1000 getting rise. This may cause a fire.
1-2. Power Supply
1-2-1. Power Specifications
Power requirements : 100 to 240 V AC
50/60 Hz
Current consumption : maximum 0.5 A (at 100 V)
maximum 0.3 A (at 240 V)
A switching regulator is used for the power supply of the
BDX-N1000. The voltage within the range of 100 V to
240 V can be used without changing the supply voltage.
n
As the inrush current at turn-on is maximum 45 A (at
100 V)/maximum 90 A (at 240 V), the capacity of the AC
power must be adequate with the inrush current of maxi-
mum 45 A (at 100 V)/maximum 90 A (at 240 V).
If the capacity of the AC power is not the adequately large,
the breaker of the AC power at the supply side will operate
or the BDX-N1000 will abnormal operate.
1-2-2. Power Cord
w
.
Use the specified power cord. If the power cord that is not
specified is used, it may cause a fire or an electric shock.
.
Do not damage the power cord. If the power cord is
damaged, it may cause a fire or an electric shock.
n
For the customer outside of the area as shown above or in a
part of Europe, the above-mentioned power cords con not
be used.
Use the power cord that is applicable to the places in the
world.
1
2
Power cord for the customer in the U.S.A. and Canada.
1
Power cord set
!
1-557-377-41
2
Plug holder (Black) 2-990-242-01
AC inlet
For customers in European countries except the United Kingdom
1
Power cord, 250 V 10 A (2.4 m) :
!
1-551-631-15
2
Plug holder (Brown) :
3-613-640-01
1
AC inlet
2
For customers in the United Kingdom
1
Power cord, 250 V 10 A (2.4 m) :
!
1-782-165-11
2
Plug holder (Brown) :
3-613-640-01
1
AC inlet
2
