OM_SPHM_engl_Vers.1_2011-09-26
Seite
25
Device reset
Entering key „F1“ when the splash screen is displayed rests all test
parameters to the delivery status.
Averaging time:
4 s
Tester:
SONOTEC
Mixer
frequency: 40
kHz
Check
mode:
logarithmic
Temperature:
°C
Notice:
The test vales stored in the device are not affected by the
device reset. Only the test parameters are reset to the initial settings!
Setting the averaging time
The SONAPHONE M provides the option of averaging the test values
recorded over a variable period. The period is set between 0 and 10
seconds in half second increments in the averaging time menu. By
turning the rotary knob the settings can be changed and stored in the
device. By pressing of „F1“ you can reach the menu test parameters
and by pressing „F3“ you can leave the settings and return to the test
monitor.
Setting the tester
In this menu, you have the option of entering 8-character-long
designations for the tester. To switch between character sets (
ABC
abc
012
:;<
), press function key “F2”.
Save
Tester
SONOTE
1
012
C
The character to be edited, is selected by pressing the rotary knob and
set by turning it. Press “F3” to store both the tester’s name and the test
site in the device.
