OM_SPHM_engl_Vers.1_2011-09-26
Seite
24
Save
Test place
Tester
MOTOR
SONOTEC
1
012
The character to be edited is selected by pressing the rotary knob and
set by turning it. To edit the last character again press the Button “F1”.
Press “F3” to store both the tester’s name and the test site for the
corresponding Single test.
The test values are stored in the test mode by pressing the rotary knob.
The following data is stored for each test:
-
Date / time
-
Type of probe
-
Test mode / mixer frequency
-
Ultrasonic test value
-
Temperature value
Archiving the individual tests is only possible by using the PC software
SONAPHONE Communicator, available as an accessory tool.
4.7 Test
parameters
Note
Altering all test parameters has a direct influence on the test values
displayed. In order to ensure reproducibility, tests which have to be
compared must be recorded with identical test parameters.
