OM_SPHM_engl_Vers.1_2011-09-26
Seite
21
2. Start
Long-time
test
The Long-time test can be manually started in the measuring screen by
pressing function key F2:
Remaining testing time
Stop
037
00:00:14
17°C
The ultrasonic readings are represented by a solid line, and the
temperature readings by a dotted line. The remaining time of the test is
shown at the top centre of the screen. The Long-time test can be
cancelled at any time by pressing function key F2. The values recorded
up to that time are stored and the entry for the duration of the test is
updated.
3.
Finishing the Long-time test
To exit the Long-time recording and to return to the check mode choose
“Close LTT!“ in the menu setup.
Back
Max.Temperature
Max. Ultrasound
Close LTT!
100°C
140
All test values, which have been recorded until this point, are kept and
displayed in the diagram of the Long-time tests stored in the device.
Ultrasonic
test values
Temperature
test values
