SonoSite M-Turbo, Service Manual

Page: 31 / 58

Chapter 4: Replacement Procedures 27
Figure 4.14 SD Card Daughter-card alignment
8 Fold the copper strip installed in Step 1 over the top of the SD Card Daughter-card.
9 Install a second strip of 1” x 5” self-adhesive copper tape over the SD Card Daughter-card on
the edge closest to the Power Supply frame as show in
Figure 4.15 .
Figure 4.15 Copper Tape Installation
10 Install a third strip of 1” x 5” self-adhesive copper tape over the SD Card Daughter-card as
shown in Figure 4.16 .
Figure 4.16 Copper Tape Installation
11 The adhesive on the copper strips must be activated by rubbing the entire surface of the
copper tape using a Q-tip as shown in Figure 4.17 .