SONNOC SNP-LU7000 User Manual Download

Page: 6 / 52

Section 1: SAFETY

Projector User Manual

1-2

• Any operation or adjustment not specifically instructed by the user’s guide

creates the risk of hazardous laser radiation exposure.

• Do not open or disassemble the projector as this may cause damage by the

exposure of laser radiation.

• Do not stare into beam when the projector is on. The bright light may result

in permanent eye damage.

• When turning on the projector, make sure no one within projection range is

looking at the lens.

• Without following the control, adjustment or operation procedure may

cause damage by the exposure of laser radiation.

• Adequate instructions for assembly, operation, and maintenance, including

clear warnings concerning precautions to avoid possible exposure to laser
and collateral radiation in excess of the accessible emission limits in Class
3R.

Summary of Contents for SNP-LU7000





















































Search results

Summary of Contents for SNP-LU7000

Reviews:

Related manuals for SNP-LU7000

Brands by name

Popular brands

SONNOC SNP-LU7000, User Manual

Search results

Summary of Contents for SNP-LU7000

Reviews:

Related manuals for SNP-LU7000

Brands by name

Popular brands