SONNOC SNP-LU7000, User Manual

Page: 15 / 52

Section 2: INTRODUCTION
Projector User Manual
2-9
2.5.1 Projector Addressing
The customer code has 100 groups.
a. the preset 1
st
group:
FACT REMOTE_CODE = 0xA0EB
b. the 2
nd
group until 100
th
group:
FACTO REMOTE_CODE1 = 0xB010
FACTO REMOTE_CODE2 = 0xB011
….
FACTO REMOTE_CODE99 = 0xB072
The method to change the customer code and code table for ID Code 1 to 99 is
shown below:
Note:
The original code: Press "Hot key" for 3 sec, then release, enter 0 then enter 0
within 2 seconds.
ID Code Change mode
Customer
code
1
Press "Hot key" for 3 sec., release, enter “0” then enter “1”
within 2 sec.
B010
2
Press "Hot key" for 3 sec., release, enter “0” then enter “2”
within 2 sec.
B011
3
Press "Hot key" for 3 sec., release, enter “0” then enter “3”
within 2 sec.
B012
… … …
10
Press "Hot key" for 3 sec., release, enter “1” then enter “0”
within 2 sec.
B019
11
Press "Hot key" for 3 sec., release, enter “1” then enter “1”
within 2 sec.
B01A
… … …
98
Press "Hot key" for 3 sec., release, enter “9” then enter “8”
within 2 sec.
B071
99
Press "Hot key" for 3 sec., release, enter “9” then enter “9”
within 2 sec.
B072