SONNOC SNP-LU7000 User Manual Download

Page: 39 / 52

Section 5: OPERATION

Projector User Manual

5-1

OPERATION

The projector has multilingual On-Screen Display (OSD) menus that allow you
to make image adjustments and change a variety of settings.

• Most of the projector controls are accessed from within the projector menu

system. There are several groups of related functions, with each group
selectable from the Main menu as shown below. Press the MENU button on
the remote control or on the built-in keypad on the rear of the projector to
display the main menu.

• Use the arrow keys to navigate within the menu and adjust a setting up or

down.

• Press ENTER to select a highlighted menu item or use it to change or

accept a value.

• Select the next item that you want to adjust in the menu and adjust it as

described above.

• Press EXIT to return to the previous menu or exit menus if at top level.

NOTE:



If the text is gray color, user is unable to enter the menu when the projector does not detect any input source.



If the text is white color, user is able to select the menu when the projector does not detect any input source.

PICTURE

Display Mode
Brightness
Contrast
Sharpness
Color
Tint
Phase
Frequency
Horz Position
Vert Position

PICTURE

OUTPUT

SETUP

OPTION

Summary of Contents for SNP-LU7000





















































Search results

Summary of Contents for SNP-LU7000

Reviews:

Related manuals for SNP-LU7000

Brands by name

Popular brands

SONNOC SNP-LU7000, User Manual

Search results

Summary of Contents for SNP-LU7000

Reviews:

Related manuals for SNP-LU7000

Brands by name

Popular brands