SONIX SN32F260 Series Page 141 User Manual Download | Manualshive

Page: 141 / 141

background image

SN32F260 Series

32-Bit Cortex-M0 Micro-Controller

SONiX TECHNOLOGY CO., LTD

Page 141

Version 1.5

SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or
design. SONIX does not assume any liability arising out of the application or use of any product or circuit described herein;
neither  does  it  convey  any  license  under  its  patent  rights  nor  the  rights  of  others.  SONIX  products  are  not  designed,
intended, or authorized for us as components in systems intended, for surgical implant into the body, or other applications
intended  to support  or  sustain life,  or  for  any  other  application in which  the failure  of  the SONIX  product could create  a
situation  where  personal  injury  or  death  may  occur.  Should  Buyer  purchase  or  use  SONIX  products  for  any  such
unintended or unauthorized application. Buyer shall indemnify and hold SONIX and its officers , employees, subsidiaries,
affiliates and distributors harmless against all claims, cost, damages, and expenses, and reasonable attorney fees arising
out  of,  directly  or  indirectly,  any  claim  of  personal  injury  or  death  associated  with  such  unintended  or  unauthorized  use
even if such claim alleges that SONIX was negligent regarding the design or manufacture of the part.

Main Office:

Address: 10F-1, NO. 36, Taiyuan Street., Chupei City, Hsinchu, Taiwan R.O.C.
Tel: 886-3-5600 888
Fax: 886-3-5600 889

Taipei Office:

Address: 15F-2, NO. 171, Song Ted Road, Taipei, Taiwan R.O.C.
Tel: 886-2-2759 1980
Fax: 886-2-2759 8180

Hong Kong Office:

Unit  No.705,Level  7  Tower  1,Grand  Central  Plaza  138  Shatin  Rural  Committee
Road, Shatin, New Territories, Hong Kong.
Tel: 852-2723-8086
Fax: 852-2723-9179

Technical Support by Email:

[email protected]

«
...
139
140
141

Summary of Contents for SN32F260 Series














































































































































Reviews:

No comments

Related manuals for SN32F260 Series

Brand: Data Signs Pages: 23

VLTAutomationDrive FC 360

Brand: Danfoss Pages: 52

Brand: turck Pages: 45

Brand: NDS Pages: 20

Brand: AUMA Pages: 48

Brand: Jebao Pages: 4

Brand: OK-I Pages: 10

Keyboard Controller Series

Brand: M-Audio Pages: 2

Brand: YASKAWA Pages: 38

Brand: LEGRAND Pages: 2

Brand: TA Pages: 4

HELENOS V DC 2005DP.2-01

Brand: Heinzmann Pages: 66

Brand: Danfoss Pages: 36

DeviceNet MSEL Series

Brand: IAI Pages: 144

Brand: Viking Pages: 4

Brand: Madas Pages: 52

Brand: Deif Pages: 12

Brand: Controlli Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands