?PVT XX
FPaaP]ch P]S BPUTch 8]U^a\PcX^]
C_fUbUYW^ EcUbc 7eYTU
BPUTch >U <PX]b >_TaPcTS 4`dX_\T]c
B^eTaTXV] <XgX]V 2^]b^[T
?aT_PaX]V cWT <PRWX]T U^a DbT
Each Sovereign is shipped with a separate power supply in protective packaging and
should be inspected for damage before use. Where an item is found to have transit damage, notify the
carrier immediately with all the relevant details of the shipment. Packing materials should be kept for
inspection.
<G?BD ?^fTa Bd__[h D]Xc
The MX-PSU is a 2U high rack-mount unit which can 15V, -15V and
+48V to either the MX10 or MX14S mixer. A lead with an IP40 678 series 7 way plug on each end is
used to connect the power supply to the mixer.
The power supply should be installed where there is adequate ventilation for heat to
circulate from the rear of the unit. The mixer has a heat-sink attached to the rear panel which radiates
some heat.
Three LED’s on the front of the unit indicate whether the power to the three voltage
rails is being supplied correctly. If one of the LED’s fails, then there is a problem with the power
supply unit.
4`dX_\T]c BPUTch
This equipment has been designed to meet the safety regulations currently advised
in the country of purchase.
It is important to connect the mains supply in accordance with the information
given. Ensure that the rear panel mains voltage statement on the separate power supply indicates that
your equipment is suitable for your mains supply voltage and that the mains supply fuse is correctly
rated. The fuse as supplied is correct for the voltage setting.
The power cable supplied carries an EARTH conductor which is connected
internally to the equipment chassis ground. This connection through a properly wired power
connector is essential for safe operation. Disconnection of this earth connection may render the
equipment unsafe, with a consequential possible electrical shock hazard from exposed metallic parts.