>dcbXST B^daRT BT[TRc <^Sd[T
?PVT %
C_fUbUYW^ EcUbc 7eYTU
%
>dcbXSTB^daRTBT[TRc<^Sd[T
%
?P]T[ 2^]ca^[b
%
>dcbXST B^daRT BT[TRc 1dcc^]b
There are two banks of six buttons, each bank
routing one of the six inputs to an output. In each bank select one of
the buttons. If two or more buttons are selected, the input with the
lowest number ( 1 - 6 ) will be routed.
Note that none of the LEDs in the buttons light up -
you can tell which input is being routed by checking which one is
depressed.
The two outputs from this module must be routed to
the inputs of another module on the desk. So, you must remember that
once you have selected buttons on this channel, you will probably
need to bring them up on another channel in the desk.