Reference Monitors User Handbook
5
REFERENCE MONIT
ORS RM-2S4 & RM-2S10
REFERENCE MONITORS RM-2S4 & RM-2S10
1
Front Panel Indicators & Controls
Fig 1-4: RM-2S4 Front Panel Controls
Fig 1-5: RM-2S10 Front Panel Controls
Power LED
The POWER LED illuminates whilst internal power is present within the unit. If this indicator
is not on, the most likely reason is simply the absence of mains power, but under fault
conditions it may also indicate a ruptured mains fuse or a problem with the internal power
supply module.
Rotary Source Selector
The rotary Source selector determines which of the four (RM-2S4) or ten (RM-2S10) stereo
audio inputs in the currently selected Bank is routed to the loudspeakers and metering.
Turning the selector anticlockwise increments the Source number and vice versa, with the
currently selected Source being indicated by illumination of the corresponding Source LED.
The currently selected Source can also be changed by the remote control ports (see the
relevant sections of this manual), & such changes will also be reflected by the Source LEDs.
The Source selector is an endless rotary encoder; further rotation will be ignored once the
lowest/highest Source has been selected. If the currently selected Bank contains fewer
Fig 1-6: RM-2S4 Source Selector
Fig 1-7: RM-2S10 Source Selector