manualshive.com logo in svg

Sonifex Phone In 6, User Handbook Manual

Share
Download
Sonifex Phone In 6 User Handbook Manual Download Page 22

10

Phone In 6 User Handbook

3

B

ASE C

ONSOLE

BASE CONSOLE

Hybrid 1 (Conference) Output 

The Hybrid 1 Output is an analogue output providing the caller 
audio to your mixing desk and acts as the Conference Output when 
in Conference Mode.  When the Base Console is fitted with optional 
AES/EBU I/O, this connector acts as digital audio output 1 (see Digital 
Audio Option later for more information).The XLR output has the 
following connections:

Pin 1: Screen 
Pin 2: Phase 
Pin 3: Non-phase

Hybrid 2 Input 

The Hybrid 2 Input is an analogue input which takes a mix-minus or 
cleanfeed from your mixer into hybrid 2 in the Base Console. When 
the Base Console is fitted with optional AES/EBU I/O, this connector 
acts as digital audio input 2 (see Digital Audio Option later for more 
information). The connector is a single balanced XLR socket with the 
following pin connections:

Pin 1 : Screen 
Pin 2 :  Phase 
Pin 3 :  Non-phase

Hybrid 2 Output 

The Hybrid 2 Output is an analogue output providing the caller audio 
to your mixing desk. When the Base Console is fitted with optional 
AES/EBU I/O, this connector acts as digital audio output 2 (see Digital 
Audio Option later for more information).The XLR output has the 
following connections:

Pin 1: Screen 
Pin 2: Phase 
Pin 3: Non-phase

Link To Remote Panel

This 8-way RJ45 socket is used to connect the Base Console to the Remote Control Panel. 
The cable between them carries the analogue balanced line level send and receive audio 
from and to the headset connected to the Remote Control Panel. You can use a standard 
CAT5 cable to link the two units together. The pin assignments are as follows:

Pin 1 : INPUT: From headset mic, phase 
Pin 2 : INPUT: From headset mic, non-phase 
Pin 3 : OUTPUT: To headset earphone, phase 
Pin 4: Ground 
Pin 6 : OUTPUT: To headset earphone, non-phase 
All other pins are unused. 

Fig 3-11: Link To Remote Panel

Fig 3-8: Hybrid 1 Output

Fig 3-9: Hybrid 2 Input

Fig 3-10: Hybrid 2 Output

Summary of Contents for Phone In 6



































Reviews:

No comments

Brands by name

Popular brands

Load more brands