10
D:Scribe User Handbook
Foot Pedal Control
D:Scribe Standalone can be used with a USB (DS-STU3 and DS-FPU3) or serial (DS-STS3 and
DS-FPS3) footpedal for convenient use of the playback controls.
USB Foot Pedals
The USB foot pedal is detected automatically by D:Scribe, and so no user-intervention is
required. If you attached the foot pedal after starting D:Scribe, you may need to restart D:
Scribe to use your foot pedal. Once the USB foot-pedal is connected, the option to select the
COM port for a serial foot-pedal is disabled in the Control menu.
Fig 2-8: The D:Scribe USB Footpedal.
Serial Port Foot Pedals
If your footpedal came supplied with a USB to serial converter cable, please read the
instructions and install the software supplied as required.
To select the port for the footpedal, select ‘Control->Footpedal’ from the menu. Then select
‘Enable’ from the ‘Control->Footpedal’ menu.
D:SCRIBE STANDALONE
D:SCRIBE ST
AND
AL
ONE
2