Deploying SMA on the LAN
The following procedures explain how to configure your gateway appliance on the LAN:
l
Connecting the SMA to the Gateway
l
Configuring SMA to LAN Connectivity
Connecting the SMA to the Gateway
To connect the SMA on the LAN:
1. Connect one end of an Ethernet cable to an unused port on your LAN hub or switch.
2. Connect the other end of the Ethernet cable to the X0 port on the front of your SonicWall SMA
210/410.
The X0 Port LED lights up indicating an active connection.
3. Configure the SMA X0 IP address. Refer to
Configuring the X0 IP Address
for more information.
Configuring SMA to LAN Connectivity
NOTE:
Before continuing, you must add a new SMA custom zone. Refer to
for more information.
For users to access local resources through the SMA appliance, you must configure your gateway device to
allow an outside connection through the SMA into your LAN.
To allow an SMA to LAN connection:
1. Using SonicOS, navigate to the
OBJECT | Match Objects > Addresses
page on the gateway
appliance.
2. In the
Address Objects
tab, click
+Add
.
3. In the
Address Object Settings
dialog box, create an address object for the X0 interface IP address
of your SMA appliance:
Name
Name for the SMA appliance
Zone Assignment
SMA
SMA 10.2 Deployment Guide for the SMA 100 Series
Deploying SMA on the LAN
4
13
