Configuring a Default Route
Refer to the following table to correctly configure your default route for the scenario you selected.
If you are using scenario:
Your upstream gateway IP address will be:
A - SMA on a New DMZ
The IP address of the DMZ interface you create
B - SMA on an Existing DMZ
The existing DMZ interface IP address
C - SMA on the LAN
The LAN interface IP address
To configure a default route:
1. Using Secure Mobile Access, navigate to the
Network > Routes
page.
2. Enter the upstream gateway device’s IPv4 address in the
Default IPv4 Gateway
field or the IPv6
address in the
Default IPv6 Gateway
field.
3. Select
X0
as the interface and click
Accept
.
Adding a NetExtender Client Route
NetExtender allows remote clients to have seamless access to resources on your local network.
SMA 10.2 Deployment Guide for the SMA 100 Series
Additional Configuration
17
