4. Click
NetExtender
to start the NetExtender client installation.
5. If prompted, click
Install
to complete the client installation.
6. Ping a host on your corporate LAN to verify your remote connection.
You have now successfully set up your SMA appliance.
NOTE:
It is easier for remote users to access the SMA appliance using a fully qualified domain name
(FQDN) rather than an IP address. It is recommended that you create a DNS record to allow for FQDN
access to your SMA appliance. If you do not manage your own public DNS servers, contact your ISP for
assistance.
Policy > Access Rules Matrix View
If the SMA zone does not appear in the
POLICY | Rules and Policies > Access Rules
matrix view, verify
that it is selected as the zone for the gateway interface connected to the SMA appliance.
To ensure the SMA zone displays in the matrix view:
1. Using SonicOS, navigate to the
NETWORK | System > Interfaces
page.
2. Click the
Configure
icon for X2 or the port you assigned as the SMA zone.
3. Select
SMA
as the
Zone
from the drop-down menu.
4. Click
OK
.
SMA 10.2 Deployment Guide for the SMA 100 Series
Testing and Troubleshooting Your Remote Connection
23
