To configure a NetExtender client route:
1. Using Secure Mobile Access, navigate to the
Clients > Routes
page.
2. To force all SMA client traffic to pass through the NetExtender tunnel, select
Enabled
in the
Tunnel
All Mode
drop-down menu.
3. Click
Add Client Route
.
4. Enter the network address of the trusted network to which you would like to provide access with
NetExtender in the
Destination Network
field. For example, if you are connecting to an existing
DMZ on the
10.1.1.0/24
subnet and you want to provide access to your LAN network on the
192.168.168.0/24
subnet, you would enter
192.168.168.0
.
5. Enter the subnet mask of the destination network in the
Subnet Mask
field. Continuing the example,
enter
255.255.255.0
.
6. Click
Submit
to finish adding this client route.
SMA 10.2 Deployment Guide for the SMA 100 Series
Additional Configuration
18
