Page 50 SonicWALL Global VPN Client 4.0 Administrator’s Guide
Appendix D - Installing the Global VPN Client with a
Ghost Application
During the normal, non-Ghost installation of the Global VPN Client, a MAC address for the virtual adapter
is generated and assigned during the installation process. However, when the Global VPN Client is
installed with CmdLine=/g (Ghost) option, a default MAC address is assigned to the SonicWALL VPN
Adapter. After the installation when the Global VPN Client is started for the first time, this default MAC
address is detected, which in turn generates a new MAC address and assigns it to the SonicWALL VPN
Adapter.
Alert! DO NOT OPEN the Global VPN Client application after installing it and BEFORE you ghost it.
Global VPN Client installation with the CmdLine=/g option works by recognizing that it is the FIRST time
that the Global VPN Client has been started, and randomly creates a unique MAC address for the
SonicWALL VPN Adapter. If you open the Global VPN Client BEFORE using ghost, you receive the same
MAC address for the SonicWALL VPN Adapter resulting in network conflicts.
Appendix E- Log Viewer Messages
The following table lists the
Info
,
Error
, and
Warning
messages that can appear in the Global VPN Client
Log Viewer.
Table 3: Log Viewer Messages
ERROR
"Invalid DOI in notify message,"
ERROR
: called with invalid parameters.
ERROR
A phase 2 IV has already been created.
ERROR
An error occurred.
ERROR
Attributes were specified but not offered.
ERROR
Authentication algorithm is not supported.
ERROR
CA certificate not found in list.
ERROR
Calculated policy configuration attributes length does not match
length of attributes set into policy configuration payload.
ERROR
Calculated XAuth attributes length does not match length of
attributes set into XAuth payload.
ERROR
Can not change the Diffie-Hellman group for PFS.
ERROR
Can not process packet that does not have at least one payload.
ERROR
Can not process unsupported mode config type.
ERROR
Can not process unsupported XAuth type.
ERROR
Can not set IPSEC proposals into empty SA list.
ERROR
Cannot do quick mode: no SA's to negotiate.
ERROR
certificate error.
ERROR
Certificate ID not specified.
ERROR
Deallocation of event publisher context failed.
