4
WIRELESS ENTRY ALARM WITH REMOTE CONTROL
Before using the device in order to ensure safe operation, read through all the instructions and warnings! Keep this
instruction manual!
The
PIR
motion sensor detects movement in a range of 5-6 m within a 110° horizontal arc. Because of its operating
principle (
passive infrared
sensor) it is completely safe, because it detects the infrared image of the moving bodies,
the entry alarm itself does not emit infrared rays.
During detection it sends a 433,92 MHz radio signal, which causes the receiving unit to emit sound and light signals.
Range in open spaces 120 m. The appliance can be set up easily.
WARNINGS
- The indoor unit may only be used in dry, indoor conditions!
- Although the outdoor transmitter is protected against splashing
water, place it in a shady, preferably dry place.
- Do not expose the device to radiant heat, sunshine, vibration or a
humid, dusty environment.
- The appliance may only be used in a home environment for the
purpose detailed above.
- Test the system before installation and at regular intervals.
- An open flame source such as a burning candle must not be
placed on the appliance!
- Never try to disassemble the appliance!
- Devices and batteries are not toys, do not let children play with
them!
- Batteries may only be replaced by an adult!
- Do not use batteries of different types and / or charges together.
- Attention! Risk of explosion in case of incorrect battery replace-
ment! Can only be replaced with the same or replacement type!
- Do not expose batteries to direct heat or sunlight. Do not open,
throw or short-circuit!
- Do not charge non-rechargeable batteries! Risk of explosion!
- Do not use accumulator instead of the battery, as its voltage and
efficiency is lower!
- Do not weld or solder directly to the battery!
- A damaged lithium battery must not come into contact with water!
- Do not lock in a tight place and/or modify it!
