• Press
PREV
and
NEXT
briefly for stepping in the playlist when it is shown on the display.
• Pressing
PREV
and
NEXT
controls the volume of the music player.
• The playlist displays detailed text data only when it is recorded with the MP3 / WMA file.
• Do not remove the memory card or USB device during playback, as this may cause data corruption!
• Recommended file system: FAT32. Do not use a NTFS formatted memory unit!
• When the memory unit is inserted, playback starts from the first song. If you have already listened
to, the playback of the last track selected will resume even when you turned off the device and
removed the storage unit.
• Only MP3 and WMA files that can be played on this unit may be on the storage!
• Abnormal operation may be caused by the unique features of the storage device, which does not
indicate a malfunction of the device.
STEREO AUDIO LINE IN (LINE IN) AND MICROPHONE IN (MIC IN)
If there are devices that are supplied with a 2xRCA audio output, you can connect three of them at
the same time to the inputs of the mixer amplifier. When the stereo signal arrives at the stereo input,
it is processed as a mono signal. The built-in amplifier is a single channel and the LINE OUT output
provides a mono signal. With three wired audio sources, two microphones can be used so that all
five sources can be individually controlled.
• Keep in mind that the LINE3 controller controls the level of the multimedia unit as well.
• You can set the output level of the multimedia unit by pressing the
PREV / NEXT
buttons.
• The available sound quality depends on the quality of the audio signal provided by the external
device, as well as its volume and sound settings.
• It is recommended to turn off the equalizer on the external devices and use it only on the amplifier.
• The small signal entering the amplifier (volume) may cause excessive noise, and excessive signal
may cause distortion. It is recommended that the signal level be maintained at medium level.
• If the audio output does not receive a 2xRCA plug, you may need to obtain an external adapter or
a connecting cable. The device does not include an audio cable.
SPEECH DRIVEN MUSIC MIXING (CROSSFADER)
Pressing the
PROMT
button on the front panel, you will hear a beeping sound, and then the current
source and music will blur. By using the microphone connected to the
MIC2
jack on the front panel,
you can terminate a speech, than the music will automatically return to the original setting.
CLEANING
Unpower the appliance prior cleaning by unplugging the power plug. Wipe the cover with a dry
cloth. Do not use aggressive cleaning agents. Do not allow any liquid inside the appliance or the
connectors or loudspeakers! To prevent scratching, wipe the display lightly with a slightly dampened,
soft cloth, without pressure.
TROUBLESHOOTING
If you detect an error, turn off the device and unplug the power cord. Try to reconnect later. If the
problem persists, review the following list. This guide can help you locate the problem if it is otherwise
connected properly. Contact a specialist if necessary.
- The machine does not work, the display does not light up.
• The amplifier is not turned on.
- Check the position of the POWER switch.
• The power cable is not connected properly.
- Check the power cable’s connection into the network socket.
- The selected signal source can not be heard.
• The volume control settings are not correct.
- Make sure that no built-in volume control or external device controller is set to a minimum.
• Not the correct input is selected.
- Check the digital display for the signal source to be listened to.
• The connection of the audio cable is not correct.
- Check the connection of the audio cable.
• No wireless connection was established.
- Start the wireless BT connection from the beginning. In case of failure, turn the BT function on the
external device off and back on, or restart the external device, or the audio box. Make sure that
other external devices are not connected to the audio box or mobile device.
WARNINGS
• Before using the product for the first time, please read the instructions for use and keep them in an
accessible place for later reference!
• After use, turn the POWER switch off and unplug the power cord.
• Noise impact occouring at that time can immediately ruin the speakers! Cracking or other noise
impact –which can occur at that time- can immediately ruin the speakers!
• In order to protect the audio system from the external noise, lead the audio cables far from the
power cables!
• Do not cover the appliance and ensure the free airflow when it is installed. At least 10 cm space
should be provided around the device! Covering the unit may cause overheating, fire or electric
shock.
• Warming up of the back panel is a natural phenomenon. Do not touch it as it may become hot!
• Incorrect operation may occur due to compressed files, the compression program and the SD / USB
memory quality, which is not a default of the device.
• The playback of even supported files is not guaranteed in all cases because it may be affected by
software and hardware conditions out of the manufacturer’s control. The playback of copyrighted
DRM files is not guaranteed!
• Due to differing parameters, there may be a difference in volume between various audio files.
• Only playable files should be stored on the external memory card because the presence of
extraneous data/files can slow down operation or cause malfunction.
• The manufacturer assumes no responsibility for data loss, corruption, etc. even if the data etc. are
lost while using this product. We highly recommend backing up the data and tracks located on the
connected storage device to a computer beforehand.
• Due to the unique features of the external devices, there may be a malfunction which is not a
default of the device.
• Immediately disconnect the unit if there’s any damage to the power cord or if any problems occur,
and contact a specialist. Many abnormalities (no sound, bad odor, foreign objects in the device,
etc.) are easy to detect.
• Do not make a cable connection during operation. Any such noise occurring at this time may
damage the speakers.
• Due to presence of network voltage, comply with the usual life protection rules! Never touch the
unit or the power cable with wet hands! Disconnect the power supply immediately if the power
cord is damaged!
• The appliance should be located so as to allow easy access and removal of the power plug! Lead
the power cable so as to prevent it from being pulled out accidentally or tripped over! Do not lead
the power cable under carpet, doormat, etc…!
• Speakers contain magnets, so do not place sensitive products (such as credit cards, cassettes,
compasses ...) on it.
• The appliance may only be connected to properly grounded 230 V ~ / 50 Hz electric wall outlets!
• The fuse on the back can only be replaced with the same size as the original! (F5A 250 V~ /
∅
5 x 20 mm)
• Make sure, no foreign objects can enter the unit between the cooling fan blades!
• Do not expose the unit to splashing water and do not place any liquid-filled objects such as cups on
the unit! Do not place any open flame sources such as burning candles on the unit!
• Protect the appliance from dust, humidity, liquids, moisture, frost and shock as well as from direct
heat and sunlight! Only for indoor use, in a dry place!
• The surface of the display is vulnerable, do not touch it, do not press it!
• Do not disassemble or modify the unit as this may cause fire, accident or electric shock! The
improper installation or improper handling will void the warranty entail.
• Somogyi Elektronic Ltd. certifies, that the device conforms to 2014/53/EU directive. Full text of EU
Certificate of Conformity available at the following link: www.somogyi.hu
• Due to continuous improvements the design and specifications may change without any prior
notice.
• We don’t take responsibility for printing errors and apologize if there’s any.
Caution: Risk of electric shock!
Do not attempt to disassemble or modify
the unit or its accessories. In case any part is damaged, immediately power
off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only
be replaced by the manufacturer, its service facility or similarly qualified
personnel.
To prevent possible hearing damage, do not listen at high volume levels
for long periods.
Waste equipment must not be collected separately or disposed of with
household waste because it may contain components hazardous to the
environment or health. Used or waste equipment may be dropped off free
of charge at the point of sale, or at any distributor which sells equipment of
identical nature and function. Dispose of product at a facility specializing in
the collection of electronic waste. By doing so, you will protect the environ-
ment as well as the health of others and yourself. If you have any questions,
contact the local waste management organization. We shall undertake the
tasks pertinent to the manufacturer as prescribed in the relevant regulations
and shall bear any associated costs arising.
