EN
Tilt Only 50 WF RTS Central
11
Copyright
©
2019 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
3. USE AND MAINTENANCE
!
This drive is maintenance-free
3.1. UP, DOWN, MY
1) To move the motorised product from one end
limit to the other, briefly press the
Up
or
Down
button (less than 0.5 s).
2) Press
my
to stop the motorised product.
3) If a my position is programmed: to
move the motorised product to the my
position, briefly press the
my
button.
The motorised product will first move to its
lower end limit then to the my position.
4) To tilt the slats, press and hold the
Up
or
Down
button or use the jogwheel on the remote
control, until the slats reach the desired position.
3.2. ADDITIONAL SETTINGS
3.2.1. Programming or modifying the favourite position
(my)
1) Place the motorised product in the desired
favourite position (my).
2) Press the
my
button until the motorised
product moves up and down: the favourite (my)
position is programmed and the green LED
flashes five times.
!
To program a favourite slat position in Venetian
blind mode (default mode), move the motorised
product to the lower end limit then set the desired orientation by pressing the
Up
button
.
1
2
4
3
1
2
5148543A000_Tilt-Only-50-WF-RTS-Central_EN_SL.pdf 11
5148543A000_Tilt-Only-50-WF-RTS-Central_EN_SL.pdf 11
13/02/2019 11:50
13/02/2019 11:50
