MDE-4541 Atlas™ Motor Kit M06699KXXX Installation • February 2006
Page 1
Introduction
This document provides information on installing replacement motors in Atlas™ units, along
with the requisite belts and pulleys. While installing the new motor, pumping unit pressures
will also need to be set to ensure problem-free operation.
Atlas Motor Kits
Kit No.
Description
M06699K001
Atlas Motor Kit, 1 HP, 60HZ, 1PH
M06699K002
Atlas Motor Kit, 1 HP, 50HZ, 1PH
Required Reading
Before installing a kit, the installer must read, understand, and follow:
• This manual
• NFPA 30A, The Automotive and Marine Service Station Code
• NFPA 70, The National Electric Code
• Applicable federal, state and local codes and regulations
Failure to do so may adversely affect the safe use and operation of the equipment.
Note: This kit must be installed by a Gasboy Authorized Service Contractor (ASC) to ensure
warranty.
Required Equipment
• Voltmeter with clamp on amp probe
• General mechanics tools
MDE-4541
Atlas
™
Motor Kit M06699KXXX Installation
February 2006
