EN
Tilt Only 50 WF RTS Central
9
Copyright
©
2019 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
2.4.3. Modifying the direction of rotation of the drive
1) Move the motorised product to a position other
than the end limits.
2) Press and hold the
Up
and
Down
buttons
simultaneously until the motorised product
moves up and down and the orange LED
flashes slowly.
3) To reverse the direction of rotation, press the
my
button until the motorised product moves
up and down and the green LED flashes five
times.
4) Press the
Up
button to check the new direction
of rotation.
The motor rotation direction is reversed.
2.4.4. Modifying the direction of rotation of the drive
wheel
1) Move the motorised product to a position other
than the end limits.
2) Press and hold the
Up
and
Down
buttons
simultaneously until the motorised product
moves up and down and the orange LED
flashes slowly.
3) To reverse the direction of rotation of the
jogwheel, press the
Up
,
my
and
Down
buttons simultaneously until the
motorised product moves up and down and the green LED flashes five times.
2.4.5. Adding and deleting an RTS control point
Find an RTS control point (A) programmed into the
drive.
Press and hold the
Prog
button on the programmed
RTS control point (A) or the
Prog
button on the drive
until the motorised product moves up and down. The
green LED flashes five times then the orange LED
flashes. The drive is in programming mode.
1
2
4
3
1
2
3
A
A
B
B
A
PROG.
A
A
B
PROG.
B
5148543A000_Tilt-Only-50-WF-RTS-Central_EN_SL.pdf 9
5148543A000_Tilt-Only-50-WF-RTS-Central_EN_SL.pdf 9
13/02/2019 11:50
13/02/2019 11:50
