Figure B
Telis 1 Chronis RTS
Programming the days of the week
In automatic mode, the Telis 1 Chronis RTS sends automatic commands to one or more window coverings for
each day of the week.
These automatic commands include:
• The same settings for every day of the week (factory setting).
• Settings divided into two groups of days - workday and weekend. Five workdays have the same
operating times each day. The two weekend or rest days operate on the same schedule, which differs
from the workday schedule.
The preset mode can be deactivated at any time by pressing and holding the selection button (
F
).
Saved settings will remain.
Modify presets:
• To set the current time for window covering operation, see section “Quick setting of an
automatic command”.
• To set a specific time for window covering operation, see
section “Editing an automatic order”.
Quick setting of an automatic command
1. Using the selection button (
F
), switch to automatic mode.
2. Press the arrow keys (
G
) to navigate to the open or close setting
you wish to edit (settings for all days or for groups of days if work
or weekend days have been configured).
3. Press and hold the Up and Down buttons (H/J) for more than
10 seconds the open or close function to modify a command. “SET”
is displayed on the screen, and the order flashes 3 times. Release the
button when “SET” disappears from the screen. The desired open or
close operation will occur at that time automatically.
• To quickly store another automatic order, repeat the procedure
starting at step 1.
Programming Continued
page 5 of 8
Pairing or Deleting a Window Covering to another
RTS Transmitter -
Figure B
Pairing or Deleting a window covering is performed in manual mode.
1. Press and hold the PROG button on the window covering control
unit until the window covering moves up and down or jogs. The
programming mode is active for 2 minutes.
2. Press the (PROG) programming button (K) on the Telis 1 Chronis
remote control. The window covering moves up and down or jogs
and is assigned to or deleted from the Telis 1 Chronis remote.
The procedure for pairing or deleting a window covering to the Telis 1
Chronis RTS is the same. It is done only in manual mode.
1. Press and hold the PROG button on the window covering control
unit until the window covering jogs. The programming mode is active
for 2 minutes.
2. Press the (PROG) programming button (K) on the Telis 1 Chronis
remote control. The window covering moves or jogs and is assigned
to or deleted from the Telis 1 Chronis remote.
Continued On Next Page
