Sonesse 30 RTS
EN
Copyright
©
2020 SOMFY ACTIVITES SA. All rights reserved.
7
1]
Fit the accessories required to integrate
the drive into the tube:
ð
Fit the crown (
a
) and the wheel (
b
) to
the drive.
2]
Measure the length (
L
) between the inner
edge of the drive head and the rim of the
wheel.
L
1]
2]
a
b
2.1.3.Preparing the tube
1]
Cut the tube to the required length.
2]
Deburr the tube and remove the debris.
1]
2]
2.1.4.Assembling the drive-tube
1]
Slide the drive into the tube. For tubes
with a smooth interior, position the cut
notch on the crown.
2]
The wheel must be locked in place to
prevent any movement in the tube.
1]
2]
L
▪
This can be achieved by fastening the tube to the wheel using self-tapping
screws, or steel pop rivets, placed between 5 mm and 15 mm from the outer
edge of the wheel, regardless of the tube.
▪
or by using a wheel lock, for non-smooth tubes.
CAUTION
The screws or pop rivets must only be fastened on the wheel and not on the
drive.
