SOMFY sonesse 30 rts, Instructions Manual

Page: 10 / 108

EN Sonesse 30 RTS
10 Copyright
©
2020 SOMFY ACTIVITES SA. All rights reserved.
2.4.Commissioning
NOTICE
- Orange LED blinks continuously in setting mode.
- Green LED blinks once when any order from paired remote is received.
2.4.1.Pre-programming the control point
Press the Up and Down buttons simultaneously
on the control point:
→The motorised product moves up and down,
green LED blinks 5 times and the control point is
temporarily programmed.
2.4.2.Checking the direction of rotation
Press the Up button on the control point:
a] If the motorised product rises, the direction of
rotation is correct: move onto Setting the end
limits [ } 10]
b] If the motorised product lowers, the direction
of rotation is incorrect: move onto the next step.
b1] Press the My button on the control point until
the motorised product moves up and down: The
direction of rotation has been modified and green
LED blinks 5 times.
b2] Press the Up button on the control point to
confirm the direction of rotation.
a
]
b
]
b1]
b2]
ü
2.4.3.Setting the end limits
NOTICE
The end limits can be set in any order.