SOMFY sonesse 30 rts, Instructions Manual

Page: 14 / 108

EN Sonesse 30 RTS
14 Copyright
©
2020 SOMFY ACTIVITES SA. All rights reserved.
Observations Possible causes Solutions
The control point is not
compatible or not
programmed. LED doesn't
light when any button of
the control point is
pressed. Check the compatibility or
pair the control point as
required referring to
Adding/Deleting Somfy
control points [
} 25]
2.5.2.Readjusting the end limits
CAUTION
Control point must be paired to the motorised product.
NOTICE
Orange LED blinks slowly until the new end limit is recorded.
2.5.2.1.Readjusting the upper end limit
1] Briefly press the Up button, to move the
motorised product to the upper end limit.
2] Press and hold the Up and Down buttons
simultaneously until the motorised
product briefly moves Up and Down.
3] Press and hold the Up or Down button to
move the motorised product to the new
desired position.
4] To confirm the new position press and
hold the
My button until the motorised
product briefly moves up and down and
green LED blinks 5 times.
1]
3]
2]
4]