Copyright © 2010 Somfy SAS. All rights reserved.
Pergola sc io
45
EN
8.2. Replacing a lost or broken Somfy io control point
Refer to the corresponding guide.
8.3. Restoring the original configuration
This reset deletes all control points, all the sensors and all the end limit settings, and resets the
motor's direction of rotation and favourite position (my). However, the fabric tension function is
retained.
Only switch off the power for the motor to be reset.
Put the blind in the middle position (if possible).
1)
Cut the power supply for 2 seconds.
2)
Switch the power supply back on for 5 to 15 seconds.
3)
Cut the power supply for 2 seconds.
4)
Switch the power supply back on: the blind moves for
5)
several seconds.
If the blind is at the upper or lower end limit, it will move
briefly.
Hold down the PROG button: the blind will make a brief
6)
first movement followed by a second a few moments
later. The motor is configured with the factory settings.
Repeat the procedures from the
-
Commissioning
" section
2 s
2 s
15 s
5 s
1
6
5
3
2
4
OFF
OFF
ON
ON
my
7 s
7 s
2 s
9. TECHNICAL DATA
Radio frequency
868-870 MHz io-homecontrol®, two-way Tri-band
Power supply
230 V ~ 50 Hz
Operating temperature
- 20°C to + 70°C
Protection rating
IP 44
Maximum number of associated control
points and sensors
9
Safety level
Class I
Markizy.by
