Copyright © 2009 Somfy SAS. All rights reserved.
Lighting Modulis RTS Ramp
Installation guide
33
EN
1. Introduction
33
2. Safety
33
2.1 Safety and responsibility
33
3. Installation
33
3.1 Contents of the kit
33
3.2 Equipment required
34
3.3 Installation recommendations
34
3.4 Safety distances
34
3.5 Fitting the Lighting Modulis RTS Ramp
34
4. Wiring
35
5. Commissioning
35
5.1 Programming an RTS control point
35
6. Operation
36
6.1 With an RTS control point from the Modulis
range 36
6.2 With an RTS control point
36
7. Optional additional settings
37
7.1 Adding/Deleting RTS control points
37
7.2 Creating multiple or group controls
37
7.3 Setting the “my” favourite light intensity
38
8. Tips and recommendations
39
8.1 Problems with the Lighting Modulis RTS
Ramp? 39
8.2 Replacing a lost or broken control point
39
8.3 Restoring the original configuration 39
8.4 Replacing a lamp
40
9. Technical data
40
1. Introduction
The Lighting Modulis RTS Ramp is a lighting ramp equipped with:
pivoting mountings and halogen spots to direct light to the required area.
-
Radio Technology Somfy (RTS) to allow remote use and the creation of personalised
-
environments.
The Lighting Modulis RTS Ramp operates with a maximum power of 100 W with a 230 V supply
and is operated from an RTS control point. The Lighting Modulis RTS Ramp enables the intensity of
the lighting to be varied as well as the preferred light intensity to be programmed, i.e. the favourite
position: By default, the favourite light intensity factory setting is 50% of the maximum intensity.
The Lighting Modulis RTS Ramp is used:
as an individual control - one Lighting Modulis RTS Ramp is controlled by one control point,
-
as a multiple control - one Lighting Modulis Ramp is controlled by several control points (maximum
-
of 12 control points),
as a group control - several Lighting Modulis RTS Ramp units are controlled from a single control
-
point.
2. Safety
2.1 Safety and responsibility
Before installing and using this product, please read the installation guide carefully.
Moreover, the installer must comply with current standards and legislation in the country in which the
product is being installed, and inform his customers of the operating and maintenance conditions for
the product.
Any usage outside of applications defined by Somfy constitutes non-compliance, and is therefore not
covered by the guarantee. In this event, as for all usage not consistent with the instructions given
here, Somfy declines any responsibility for harm or damage.
Never begin installing without first checking the compatibility of this product with the associated
equipment and accessories.
Never look directly at the lamps at close range when the ramp is on
Contents
3. Installation
3.1 Contents of the kit
Lighting Modulis RTS Ramp
a.
Support base x 3
b.
pivoting mounting x 3
c.
"T" bracket x 3
d.
Allen keys BTR x 6
e.
Plugs x 3
f.
Screws x 3
g.
Headless screws x 6
h.
Plastic cover
i.
b
e
h
c
f
i
d
g
a
5061612X00_LMR_RTS_livre.indb 33
30/04/09 18:44:47
