Copyright © 2009 Somfy SAS. All rights reserved.
Lighting Modulis RTS Ramp
36
Installation guide
EN
6. Operation
6.1 With an RTS control point from the Modulis range
1) To switch the light on:
Press the Up button:
-
2) To switch the light on:
Press the Up button:
-
To switch the light on directly to the “my” preset favourite light
3)
intensity setting
Press the my button.
-
To increase the light intensity
4)
Move the thumbwheel up:
-
The light intensity begins on the minimum light intensity level
-
possible, i.e. on a night-light level;
The light intensity increases every time the thumbwheel is
-
moved.
To decrease the light intensity
5)
Move the thumbwheel down:
-
The light intensity decreases every time the thumbwheel is
-
moved;
The minimum light intensity corresponds to a “night-light” level.
-
Note: Once the “night-light” level has been reached, move the
thumbwheel down to switch the light off.
6.2 With an RTS control point
6.2.1 Standard control point
N.B.: A standard control point is a three button control point (Up/
Stop-my/Down).
1) To switch the light on:
Press the Up button:
-
To switch the light off:
2)
Press the Down button:
-
To switch the light on directly to the “my” preset favourite light
3)
intensity setting
Press the my button.
-
To increase the light intensity
4)
Press and hold the Up button:
-
The light intensity increases as long as the button is held.
-
Release the Up button when the required light intensity is reached.
-
To decrease the light intensity
5)
Press and hold the Down button:
-
The light intensity decreases as long as the button is held.
-
Release the Down button when the required light intensity is
-
reached.
Caution: Once the “night-light” level has been reached, keep the Down
button pressed to switch the light off.
1
ON
4
100%
+
-
0%
5
100%
+
-
0%
2
3
OFF
my
1
ON
4
100%
+
-
0%
5
100%
+
-
0%
2
3
OFF
my
5061612X00_LMR_RTS_livre.indb 36
30/04/09 18:44:51
