![background image](http://html1.mh-extra.com/html/somfy/fts-hi-pro-series/fts-hi-pro-series_manual_1317554007.webp)
www.somfy.com
page6
FTS system operating principle
Operation of the FTS
Control
Control unit
Actuators
Actuator power supply
No order
On standby
The strap assembly remains
mechanically tensioned.
None
Press the brake
release button.
The fabric and strap tubes can rotate
freely: they will turn under the weight
of the system or if they are rotated
manually.
(free rotation of the two actuators)
Power supply to the fabric and
strap actuator brakes while the
release button is pressed.
Note: this function must only be
used for a technical operation on
the FTS system.
Press (1/2 sec.) on
the awning out
button.
Outputs timed until
the end limit is
reached or the "stop"
command is made
using the control.
The strap tube rolls the straps, the fabric
tube brakes the fabric to prevent it from
sagging too much (dynamic tension).
Roller
Dynamic
braking
Power supply:
for the 2 actuator brakes.
•
for the strap actuator in the
•
direction that corresponds to
the rolling of the straps.
for the fabric actuator at
•
reduced tension (dynamic
tension).
Press both
buttons,
or on the awning
out button,
or stop at end
limit of the
system.
Output timed by the
final tension setting.
The strap tube is locked, the fabric
tube rolls the fabric to tension it for the
duration of the final tension delay.
Power supply:
for the fabric actuator brake.
•
for the fabric actuator in the
•
direction that corresponds to
the rolling of the fabric.
Summary of Contents for FTS Hi-Pro Series
Page 69: ...www somfy com page68 Notes...